Clutch cable
For high bars,including RT, GS, G/S, ST
Associated BMW No. 32732324956
Brass rivet, locates "dash" panel to fairing
RT=8, S=10, RS=14
Associated BMW No. 07119949633
Final drive drain plug 'o' ring seal
Associated BMW No. 33117695219
K1200/1200/1600 ATF
K75/100/1100/1150
R1200
R nineT
Braided clutch line with sealing washers and banjo bolts
R1150GS
Associated BMW No.21527682151
Manifold to head "O" ring
16v Not K1200
Associated BMW No.11611465169
Major service kit: oil and air filters, gaskets, seals, washers and spark plugs as required, straight or bendy filter (please state if oil cooler fitted)
'81 on
Associated BMW No. 11421337575
Tom says: "Please put a note in when ordering this item what bike they are for, model and year please. Also if an oil cooler has been fitted"
In line fuel filter
(for other fuel filters see "petrol tank" and "petrol taps")
Centre ignition stick coil one each side (non BMW made by Beru.)
R850/1100/1150/1200, all twin spark machines except Cruiser models
R1200 models except the water cooled models and R1200C
Associated BMW No.12137715853
Major Service Kit. Oil and air filters, gaskets, seals, washers & spark plugs (WITHOUT fuel filter and 'o' ring)
R850 and R1100 models except Cruiser and S
Associated BMW No. 11421460845
Tom says: "Have you got the tools? 1. oil filter removal tool 023092, 2. the spark plug removal tool 223194 or the BMW version 223193, more money for the same job, 3. the spark plug (HT) lead puller 223064, we also do the fluids, engine oil 026520, final drive and gearbox oil 026058 and brake fluid 026345 or the clear castrol version 026347"
Front disc mounting bobbin
K1200R 08/06 on (ATF)
R1100S pre 11/00
R1200
Associated BMW No. 34112335745
Rocker box centre nut, stainless steel
Associated BMW No. 11121744330
Finned nut,
'76 on, will retro fit /5, /6
Associated BMW No. 18211234721
(Not R45/65 with the smaller diameter pipes)
Final drive output seal, Not wheel side
Associated BMW No. 33117722890
Brembo stainless steel disc, 305mm diameter, 40mm width, 5mm thick (4.5mm min thickness)
With bobbin kit (essential when fitting new discs) and equivalent of the permanently attached BMW bobbins
R1200GS/Adventure + R1250GS/Adv, Late 2007 ONWARDS.